|
DESCRIPTION: |
|
SUPERIOR EPOXY SEAL is
a two component epoxy-polyamide sealer designed to
protect and beautify concrete, metal, brick and wood. It
provides a durable, cleanable light reflecting coating
with excellent adhesion and protective qualities. |
|
USES: |
| Base color coat.
Slip-resistant surface
when suitable grit is broadcast into freshly applied
surface.
Semi-gloss topcoat. |
|
ADVANTAGES: |
| Fast-drying and easy to
apply.
Improves the appearance
and performance of any substrate.
Provides cleanable,
durable, light-reflective floor.
Suitable for warehouses,
stairs, machine shops, garages, and most industrial
environments. |
|
SURFACE
PREPARATION: |
| Apply SUPERIOR EPOXY
SEAL to clean, sound substrate. Dusty, soft or greasy
concrete will be difficult to coat and may cause
delamination. It is often helpful to get a good, rough
profile on the concrete to assure a good mechanical
bond. Shot blasting with light shot, wire brushing or
acid etching can achieve the desired effect. Surfaces
should be washed, degreased and vacuumed. When using
SUPERIOR EPOXY SEAL on existing coatings, test for
compatibility by applying test patch. Check for any
lifting, softening or peeling of the existing coating.
Strip the old coating if there is any doubt about
compatibility. |
|
MIXING
AND APPLICATION: |
|
Part A and part B
should be charged to a clean mixing pail and mixed until
streak-free. If the temperature is below 50 deg F, allow
the mixed product to stand for 30-45 minutes before
applying. Apply with a medium nap (3/8 inch) roller,
brush or spray. For a skid-proof surface, immediately
broadcast a suitable grit into the wet coating.
Skid-proof within 15 minutes of application. |
|
LIMITATIONS: |
| Do NOT apply when
temperature is below 40°F.
Do NOT apply to latex
modified mortar or concrete. |
|
CLEAN
UP: |
| Clean tools and
equipment immediately with a suitable solvent such as
xylene or lacquer thinner. |
|
PACKAGING: |
| 2 gallon units
10 gallon units
110 gallon units
|
|
CAUTION: |
| For professional use
only. Epoxy systems can cause delayed dermatitis. Avoid
prolonged contact with skin. See Material Safety Data
Sheet for proper handling and required safety equipment. |
|
PROPERTIES
AT 77°F
| Mix ratio by volume |
1:1 |
| Colors |
Tile red, blue, light
gray, dark gray, green, brown and white |
| Pot Life |
6-10 hours |
| Solids by Weight |
64% ± 2 depending upon
color |
| Surface Temperature |
40 to 90 deg F at time
of application |
| Film Thickness |
Recommended 3 mils dry |
| Cure
Schedule
|
Tack-Free: 2 hours |
| Re-Coat 4-6 hours |
| Light Traffic: 16-24
hours |
| Full Cure: 7-10 days |
| At temperature below 60
deg F, allow extra time for curing. |
| Shelf Life |
1 year |
|
