|
DESCRIPTION: |
| SUPERIOR PATCH BINDER
GEL is a two component, gel consistency, 100% solids,
epoxy adhesive system designed to bond cured concrete to
cured concrete. SUPERIOR PATCH BINDER GEL may also be
used for bonding steel in concrete as well as many other
miscellaneous construction materials. |
|
USES: |
| Cured concrete bonder.
Adhesive for miscellaneous
construction materials.
Epoxy mortar for
vertical and overhead patching. |
|
ADVANTAGES: |
| Moisture insensitive.
Easy 1:1 mix ratio.
100% solids, conforms to
VOC regulations.
Moderate working time. |
|
SURFACE
PREPARATION: |
| The surface must be
clean and free of any dust, oil, grease, laitance,
curing compounds or any other contaminants. This should
be achieved by sandblasting, water blasting or some
other mechanical means. New concrete surfaces may be
acid etched with muriatic acid and rinsed thoroughly.
Surface may be dry or damp, but must be free of standing
water. |
|
MIXING
AND APPLICATION: |
|
The individual
components should be mixed prior to combining them. Do
not mix more material than can be used in 40 minutes.
Mix thoroughly, 1 part by volume, component A with 1
part by volume of component B in a suitable clean
container and mix with a low speed drill until a uniform
color is obtained. The sides and bottom of the mixing
container should be scraped frequently to ensure
complete mixing. The Kol mixer is ideal for this
operation. The receiving surface should be primed with
the neat epoxy mix prior to placing the mortar mix. |
|
LIMITATIONS: |
| Do NOT apply when
temperature is below 40°F.
Do NOT apply to latex
modified mortar or concrete. |
|
CLEAN
UP: |
| Clean tools and
equipment immediately with a suitable solvent such as
xylene or lacquer thinner. |
|
PACKAGING: |
| 2 gallon units
10 gallon units
100 gallon units
|
|
CAUTION: |
| For professional use
only. Epoxy systems can cause delayed dermatitis. Avoid
prolonged contact with skin. See Material Safety Data
Sheet for proper handling and required safety equipment. |
| |
|
PROPERTIES
AT 77°F |
| Mix ratio by volume |
1:1 |
| Consistency |
Gel |
| Weight per gallon |
11.95 |
| Color |
Part A - White, Part B
- Black |
| Pot Life (100 Grams) |
35-45 minutes |
| Shore Hardness (ASTM
D-9940) |
65-75 D |
| Bond Strength (ASTM
C-882) |
1500 psi minimum, 14
day moist cure |
| Water Absorption |
< 1 % |
| Compressive Modulus
(ASTM D-695) |
< 130,000 psi |
| ASTM C-881 |
Type III, Grade 3,
Classes B & C |
| Coverage |
231 cu. in./gallon |
| Shelf Life |
1 year |
