Phone:  Toll Free: 800-240-1310 or Local: 770-808-0023Contact Us Site Map Home


Superior Security Sealant - #SPS - Rapid Set

For faster set time and application by meter mix or side cartridges with static mixer.


SUPERIOR SECURITY SEALANT is a 100% solids, semi-rigid, two component epoxy gel for security caulking. SUPERIOR SECURITY SEALANT may be applied in layers up to one half inch thick.  For hand mix and application.  40 minute pot life.





  • Semi-rigid sealant for security areas.
  • Filler and sealer for control joints.


  • Hard and pick-resistant.
  • Easy -to-use 1:1 by volume mix ratio.
  • Has movement capability.
  • 100% solids.
  • 20% elongaton.
  • Excellent adhesion.


  • Do NOT apply when temperature is below 50oF.
  • Do NOT apply to latex modified mortar or concrete.
  • Should not be applied when concrete is less than 5 days old.

Surface Preparation

Area must be clean and dry. Saw-cuts shall be blown clean and dry with compressed air to remove all excess moisture and debris.


Mixing & Application

Mix equal volumes of Part A and Part B. Mix thoroughly until the color is uniform with no streaks in evidence. Be sure to scrape the sides and bottom of the mixing pail. In joints up to 1/2 inch wide, the depth should be equal to the width. In joints wider than 1/2 inch, the depth should be maintained at 1/2 inch. The width or depth of the joint should not be less than 1/4 inch. For neat and easy application, tape both sides of joints and grooves with masking tape.


Apply SUPERIOR JOINT SEAL with conventional caulking gun, disposable plastic dispenser or pour from the can. Fill joints flush to the top or slightly higher than the surrounding surface. A second pass prior to curing may be necessary due to the fact that all pour grade materials will "dish" or become concave. Remove all tape and clean spills and tools immediately upon completion of installation.


Clean Up


Clean tools and equipment immediately with a suitable solvent
such as xylene or lacquer thinner.



For professional use only. Epoxy systems can cause delayed dermatitis. Avoid prolonged contact with skin. See Material Safety Data Sheet for proper handling and required safety equipment.



  • Packaging: 2 component cartridges, 2 gallon units, 10 gallon units, 300ml x 300ml side-by-side cartridges
  • Mix Ratio by Volume: 1:1 by Volume
  • Color: Part A White; Part B Black; Gray mixed
  • Pot Life (100 Grams): 5 Minutes
  • Bond Strength: > 500 PSI (ASTM C-321)
  • Tensile Strength: 6000 psi (ASTM D-638)
  • Tensile Elongation: 20% (ASTM D-638)
  • Water Absorption: <1%
  • Shelf Life: 1 Year
  • Viscosity: Gel
  • Shore D Hardness: 75 - 85 (ASTM D-2240)
  • Solids by Weight: 1


2527 Lantrac Court

Decatur Georgia GA 30035

Toll Free

Phone: 800-240-1310    Fax: 800-240-7662


Phone: 770-808-0023    Fax: 770-808-6777

Copyright © 2015 - Superior Epoxies, Inc.