NEW PRODUCT ANNOUNCEMENT

 
SUPERIOR COVE KIT PRE-MEASURED EPOXY/WALL PERIMETER SEALER
  
DESCRIPTION:
SUPERIOR COVE KIT is a structural epoxy mortar designed for vertical application at floor-wall joints to produce a sanitary perimeter seal.
 
USES:
Form cove base
Provide a sanitary perimeter seal
Provide floor-wall joints chemical resistance
 
ADVANTAGES:
Easy to use pre-measured kits
100% solids- no shrinkage
Excellent chemical resistance
Seamless and easily cleaned
 
SURFACE PREPARATION:
Surface must be clean, sound dry and free of any oils, grease, curing compounds, dust, laitance or any other contaminants.  This may be accomplished by sand blasting, water blasting or some other mechanical means. New concrete surfaces should be acid etched with SUPERIOR SAFETY ETCH and rinsed thoroughly.  Surface may be dry or damp, but must be free of standing water.  Apply SUPERIOR PRIMER 171 at 200 sq.ft/gal by brush or short nap roller.
 
MIXING AND APPLICATION:
1. Pour contents of Binder part A and Part B into empty pail and mix thoroughly with spatula or a slow speed ½” drill with paddle.
2. Add aggregate slowly, while mixing, to the mixed binder.
3. Mix until aggregate is thoroughly wet, approximately 2 minutes.
4. Apply to primed surface with cove trowel while primer is still tacky.  If primer cures before application of cove mix, re-apply.
 
CLEAN UP:
Clean tools and equipment immediately with a suitable solvent such as Xylene or lacquer thinner.
 
PACKAGING:
Kit contains binder and blended aggregate in plastic 3 gallon mixing container.  Kit covers 17.5 square feet @ 1/8”.  (35 lineal feet @ 4”vertical, 2” horizontal @ 1/8”)
 
CAUTION:
For professional use only.  Epoxy systems can cause delayed dermatitis. Avoid prolonged contact with skin.  See Material Data Sheet for proper handling and required safety equipment.
 
DISCLAIMER:
All recommendations, technical data and test data contained in this brochure are based upon the results of controlled laboratory tests or in actual field tests However, SUPERIOR EPOXIES & COATINGS, INC. makes no warranty of any kind concerning this data.  Due to variance in storage, handling and applications of these materials, SUPERIOR EPOXIES & COATINGS accepts no liability for the results obtained.  It is suggested that potential users try small applications to determine the suitability of each individual product for their specific requirements..